DHT Series 2017-11-01T16:49:49+00:00

DHT Series

High Inlet Temperature Refrigerated Air Dryer

20 – 125 scfm

The Aircel DHT Serieshigh inlet temperature refrigerated dryers are perfect for compressors without an after cooler.

  • Accepts inlet temperatures up to 205°F
  • ISO 8573.1 Class 5 (45°F/7°C) dew point performance
  • Ambient Air Temperature: 40°F – 120°F (32°F with low ambient protection)
  • Maximum Inlet Air Temperature: 205°F
  • Maximum Operating Pressure: 200 psig
Model NumberCapacityVoltageConnection SizeWeight (lbs.)FLAHeightWidthDepth
  1. Hot compressed air (up to 205°F) enters the system and moves into the pre-cooler/re-heater (A), where it is pre-cooled by the cold outgoing air.

  2. The air is then directed through the air-to-refrigerant heat exchanger (B), where it is cooled to 38°F by the refrigeration system.

  3. The cold, saturated air flows into the three-stage separator (C), where liquids are removed from the air. This separated condensate is then ejected from the system via the Aircel programmable timer drain (D).

  4. The cold, dry air is then reheated by the incoming warm air (E) before leaving the dryer.