APET Series 2017-11-01T16:43:40+00:00

APET Series

High Pressure, Stainless Steel Refrigerated Air Dryer

45 – 1,000 scfm

225, 500, 725 psig

The APET Series is a high pressure refrigerated air dryer, with operating pressures up to 725 psig. Air-side components composed of 316 stainless steel provide corrosion resistance for high pressure applications, such as PET market, injection molding, component testing, naval and military functions, and other high pressure applications.

  • ISO 8573.1 Class 4 (38°F/3°C) dew point performance
  • Ambient Air Temperature: 40°F – 120°F
  • Inlet Air Temperature: 40°F – 120°F
  • Operating Pressure: 60 – 232 psig
Model NumberCapacity @ 225 psigCapacity @ 500 psigCapacity @ 725 psigVoltageConnection Size (NPT)FLAWeight (lbs.)HeightWidthDepth
APET-45434647115‑1‑600.5″4.571151616
APET-65616667115‑1‑600.5″5.578151616
APET-80768284115‑1‑600.5″8102151616
APET-125115125128115‑1‑600.5″48124222418
APET-200182198202115‑1‑601″14.5162222418
APET-260237257262230‑1‑601″13.5240303625
APET-415379410419460‑3‑601″8345303625
APET‑570517560572460‑3‑601″9.5567453445
APET‑860780845864460‑3‑601″12.5582453445
APET‑1,0009069811,002460‑3‑601″11.5790483854
  1. Saturated, compressed air enters the system and moves into the pre-cooler/re-heater (A), where it is pre-cooled by the cold outgoing air.

  2. The air is then directed through the air-to-refrigerant heat exchanger (B), where it is cooled to 38°F by the refrigeration system.

  3. The cold, saturated air flows into the three-stage separator (C), where liquids are removed from the air. This separated condensate is then ejected from the system via the Aircel condensate drain (D).

  4. The cold, dry air is then reheated by the incoming warm air (E) before leaving the dryer.