AMD Series 2017-11-01T16:39:16+00:00

AMD Series

Modular, Point of Use Desiccant Air Dryer

4 – 175 scfm

The Aircel AMD Series dryers provide solutions for applications requiring a low pressure dew point of either -100°F or -40°F with flow ranges from 4 to 175 scfm. Equipped for use all over the world, thanks to the wide range of acceptable voltages. Multiple installation configurations including horizontal, vertical, and wall mounting as well as quick access desiccant, remote access, and energy management system make the AMD Series a versatile and easy-to-use system.

  • -40°F or -100°F dew point performance
  • Minimum Ambient Air Temperature: 41°F
  • Inlet Air Temperature: 35°F – 122°F
  • Operating Pressure: 58 – 232 psig

For larger capacities, higher pressures, and custom dryer options, please contact an Aircel factory representative.

Model NumberCapacityVoltageConnection SizeWeight (lbs.)HeightWidthDepth
AMD-44100-240 VAC or 12-24 VDC3/8″ NPT2917.5113.6
AMD-66100-240 VAC or 12-24 VDC3/8″ NPT3120113.6
AMD-88100-240 VAC or 12-24 VDC3/8″ NPT3322.2113.6
AMD-1010100-240 VAC or 12-24 VDC3/8″ NPT3625113.6
AMD-1515100-240 VAC or 12-24 VDC3/8″ NPT4332113.6
AMD-2525100-240 VAC or 12-24 VDC3/8″ NPT5341.9113.6
AMD-3535100-240 VAC or 12-24 VDC3/8″ NPT6857.4113.6
AMD-4545100-240 VAC or 12-24 VDC3/4″ NPT12027.620.97.1
AMD-5555100-240 VAC or 12-24 VDC3/4″ NPT13531.620.97.1
AMD-6565100-240 VAC or 12-24 VDC3/4″ NPT14835.520.97.1
AMD-8585100-240 VAC or 12-24 VDC1″ NPT17243.420.97.1
AMD-105105100-240 VAC or 12-24 VDC1″ NPT21255.620.97.1
AMD-135135100-240 VAC or 12-24 VDC1.25″ NPT23863.520.97.1
AMD-175175100-240 VAC or 12-24 VDC1.25″ NPT28479.220.97.1

  1. The pre-filter with electronic drain removes particulates from the air stream. Wet air passes through the filter down to the bottom valve assembly.

  2. The air is fed through the bottom of the desiccant bed and moves through high performance desiccant until dry.

  3. Purge air passes to atmosphere through the silencer, which is fitted to the exhaust valve.

  4. On exit from the desiccant cartridge, the air passes through the 1 micron dust filter, removing particulate in the air stream.

  5. The control system cycles the process air between the two desiccant towers.

  6. While one chamber is on stream removing water vapor, the other is being regenerated.