Aircel Compressed Air Dryer Systems

Purification for Every Application

Desiccant Air Dryers

ABP Regenerative Heated Blower Purge

ABP Heated Blower Purge
Regenerative Desiccant Dryers

The Aircel ABP (800 - 10,000 scfm) heated blower purge desiccant air dryer with 2% purge rate was created with energy savings and usability in mind. The high-efficiency blower bringing in ambient air for the regeneration cycle, Aircel Programmable Controller, heatless back-up mode, Parallel Cooling Mode, and standard Energy Management System work seamlessly to create maximum energy savings to the bottom line.

Connect a PC to the 7" Allen Bradley Control System to monitor, access, and easily integrate into your plants overall control system. Mounted pre-filter and after filter included standard with each model.

Why is the ABP Series different?

For added energy savings the ABP Series uses a high efficiency blower to take in ambient air required during the heat regeneration cycle to desorb moisture from the desiccant, no compressed air is used during this phase.

Dry compressed air is used during the dry air cooling regeneration period for reduced heat and dew point spike at tower switchover. This amounts to an average process air use of 2% of the rated capacity of the dryer.

Aircel’s unique parallel cooling mode further reduces the heat and dew point spike prior to tower switchover. During the parallel cooling mode both inlet valves are open for a 10 minute period and divert half-load to each tower further cooling the previously regenerated desiccant bed with a larger volume of air.

The Aircel ABP Series replaces the legacy HRE Series.

© 2017 Aircel. All Rights Reserved
(865) 681-7066   |   323 Crisp Circle Maryville, TN 37801   |   |     |   Follow Us On Facebook  Follow Us On Twitter  CAGI Member